Highly Functional

STAIR-ROUT ^TM MODEL 40

• Enter rise
• Enter run
• Enter number of cuts
• Press start
• Menu Selectable Operation (no programming)

Machine continuously checks for operator entry errors. After cutting, the operator has a default choice of repeating rise, run and number of risers or changing one or more selections.

Features

• High speed automatic stringer routing
• Operator choice of repeat or change
• Standard Box Step Rout with Round Nose*
• Automatic rise, run cutting and board advancement
• Full 11 HP cutting power – two 5.5 HP motors direct drive (no belts
• High frequency motors for clean cuts (vary speed solid state drive)
• Minimal operator training required
• Screen display shows scale picture of step before you cut
• Heavy duty steel construction
• No programming required
• Stringer 6” to 14” by 3/4” to 2½” (double or single stringers

Specifications

• Footprint w/o Overhang…………54” x 61”
• Height…………………………………..68”
• Machine Weight…………………….3500 lbs.
• Motor Power Required…………..200/400/600 Volt Series 1ph/3ph
• Control Power Required…………115 Volt 1ph
• Air Required………………………….80 PSI Clean & Dry
• Tool Shank Capacity……………….½” Diameter

• Footprint w/o Overhang : 54” x 61”
• Height : 68”
• Machine Weight : 3500 lbs.
• Motor Power Required : 200/400/600 Volt Series 1ph/3ph
• Control Power Required : 115 Volt 1ph
• Air Required : 80 PSI Clean & Dry
• Tool Shank Capacity : ½” Diameter

Available Options

• Standard Rout with Square Nose
• Pocket Rout
• Pocket Rout with Square Nose
• Back Rout
• Back Rout with Square Nose
• Slant Riser
• Enter Open Horse
• Open Routing with 45º Miter for Mating with Riser
• Tread Return Routing
• Custom Configurations

Standard Box Step with Round Nose

Standard Box Step with Round Nose

Open Stringer

Open Stringer

How It Works, Stair-Rout™ Model 40

Our machines run on 208-220 volt 3 phase service to run motors (other voltages available). We also require 120 volt service for control and 80 psi clean and dry compressed air. The Stair-Rout™ operates under electrical control with pneumatic clamping. Our CNC stair stringer router used for box stair construction is fully automatic with no setup time. The stair router is designed for use by a low skill operator to rout box stair stringers.

A stair builder like you will work in fractions and so does our stair stringer router (Metric and Decimal also available). Just match the numbers on the computer screen to the numbers on your box stair work orders and press start. You can also use our stair stringer router for other configurations including no riser stairs, pocket stairs, slanted risers, center open horse stringers and extreme run sizes.

Everything is done with just the push of a button. There is nothing to setup, just enter the rise and run and press start.

Standard Box Step with Round Nose

Standard Box Step with Round Nose

Open Stringer

Open Stringer